Home › DJ Software › Serato Scratch Live › Rane Serato SL4

Rane is pleased to announce that our products which previously included Serato Scratch Live software are now fully supported by Serato DJ software. DJs currently using Serato Scratch Live with supported Rane hardware have the option to migrate to the new and improved Serato DJ free of charge. How-to: Calibrate Scratch Live Why is it important to calibrate Scratch Live? In the standard configuration of Scratch Live an analogue audio source (turnable / CDJ) sends the Scratch Live control signal into a Rane Scratch Live hardware device, where it is digitized, sent to the Scratch Live software and used to control playback of a digital.

Description

The SL 4 connects four vinyl turntables or CD players to your computer and the mixer of your choice. Using special control vinyl, CDs or MIDI controllers, you can scratch and mix files from your Mac or Windows computer's CD or hard drive. This intuitive system replicates the traditional DJing experience for 'real feel' usability. With unparalleled performance, stability and audio quality, you'll know why thousands of DJs worldwide choose Rane with Serato Scratch Live.

The SL 4 is the first standalone DJ interface with two USB ports for seamless DJ changeover and back-to-back performances. Superior sound is delivered with high quality 96 kHz, 24-bit audio. Built-in galvanic isolation between USB and audio, with turn on/off muting, ensures that only the purest interference-free audio signal is heard. Low-latency ASIO and Core Audio drivers allow you to use the SL 4 as a studio production tool with multiple third-party software applications. The SL 4 is masterfully crafted by Rane for the discerning DJ.

• Computer interface: USB 2.0 high-speed
• USB power requirement: 500 mA, 5.0 Volts
• USB audio channels: 10 record/10 playback
• External power supply: 7.5 volts (included)
• Converters: 24-bit/48kHz or 96kHz sample rate switchable
• DAC dynamic range: 104.5dB, A-weighted
• ADC dynamic range: 103dB, A-weighted
• Dynamic Range 101dB A-weighted analog-in to analog9out
• Frequency response: -0.6dB @ 20Hz, -0.03dB @ 20kHz
• THD+N: 0.007% at 1kHz, 20Hz to 20kHz BW
• Inputs: 1-4 individually Phono/Line, switchable
• Aux Input: Line-level only
• Gain: Unity
• Maximum input/output: 3 Vrms @ 1 kHz
• Switched phono input max: 70mV rms @ 1 kHz
• Dims: 7.25 x 5 x 1.7 (18.4 x 12.6 x 4.3 cm)
• PDF LIST OF SERATO SCRATCH COMPATIBLE PRODUCTS
  

System Requirements

• PLEASE NOTE: These are the minimum requirements to run Scratch Live with the SL 4. For best performance and for use in professional situations we recommend you buy a higher spec computer. Rane also recommends Intel processors.
• Available USB 2.0 port
• 1024 x 768 screen resolution or higher
• Hard drive space for music: 5400RPM minimum, 7200RPM recommended for high resolution audio playback
• Mac
• 2GHz Intel Core Duo
• 2GB RAM
• OSX 10.5.8 or higher
• Windows
• 2.2GHz Intel Core Duo
• 2GB RAM
• Windows XP with Service Pack 3 or
• Windows Vista with Service Pack 2 or
• Windows 7. TC Helicon recommends Windows 7 over Vista
• *If you have a large library, you will benefit from having more RAM
• Note 1: If you are using Scratch Live's more system-intensive features such as DJ-FX or multiple virtual decks and are having issues, you may need a higher spec computer for best results, or make sure you have optimized your system: Windows 7 and Vista / Mac OS X.

UDG SERATO POUCH

OYAIDE TRS CABLE

HOSA QUARTER TO QUARTER CABLES

HOSA RCA TO RCA CABLES

HOSA USB CABLES

HOSA USB HUB

CONTACT US - BEAT A PRICE - GEAR RENTAL - TRACK YOUR PACKAGE - RETURNS / WARRANTY INFOABOUT US - SHIPPING INFO - PURCHASE ORDERS - CUSTOM INSTALLATION - TERMS

Serato Control CD 1.0

Serato Control CD 1.0.0

You can burn your own Serato Control CDs or use the Control Signal .wav file directly from a removable storage device like a USB drive or portable hard drive.

The Serato Control CD is available in 2 file formats:

This file requires an unzip utility to open and contains Serato Control CD.wav. Please unzip the package to show the .wav file.

Serato Control CD.wav is a stereo 44.1KHz wave file that you can drop into any CD burning application, or run directly off a removable storage device such as a USB key or removable hard drive.
When using a USB stick, connect the USB stick with the Serato Control CD.wav to your digital player and select 'USB' as the control connection mode.

When burning the .wav file to a CD do not adjust the audio levels, make sure any audio auto-levelling is turned off, don't down-sample the audio or use a different audio format.

Altering the source audio file in any way will result in the control signal not functioning correctly.

Rane Serato Scratch Live Sl1

This is a disc image file, suitable for burning to a CD.

After downloading the file:

• In Mac: Right click on the file and select Burn to disc from context menu.
• In Windows: Right click on the file and select Burn disc image*.

*If you can't see the Burn disc image option, you might need to download a 3rd party CD authoring tool capable of burning .iso files.

Rane Serato Scratch Live Control Cd Free

Copyright information

Serato Scratch Live Driver

The Serato Control Tone, the audio pressed on Control Vinyl and the Control CDs, is copyright Serato Audio Research.
The Control CD download is licensed for personal use only. The creation of personal backups of the Control CD is allowed, however duplicating Control CDs for commercial benefit is strictly prohibited.
For avoidance of doubt the duplication or creation of Control Vinyl for any use is strictly prohibited.